How Do I Place My TxTag? If your TxTag has just arrived, your primary concern is likely to be how best to place it within your vehicle for smooth transition through toll roads. Correct positioning of your TxTag is imperative for proper toll recording and free flowing trips.
This post will show you the very easy steps on the right positioning for your TxTag which would aid in proper placing of your TxTag on your car’s windshield so as not to waste precious time while on the move and also avoid all sorts of trouble. So, without further ado, let’s get down to it and make tolls easy!
Importance of Proper Placement of the TxTag
The first thing to realize is why it matters in the context of “how do I place my TxTag”. This makes certain that you have complete utility of your toll tag and do not need to deal with avoidable inconveniences.
The proper placement of the TxTag is not only important for practicality but also for efficiency in measuring the toll. Not placing it properly might result in unpaid toll scans which would lead to a negative impact on the finances, unpaid tolls and injurious toll violations. Once optimally placed your TxTag will ensure the following:
- Automatic toll payments.
- Correct tolls charges.
- Good performance of the scanners.
Okay, now that we understand why it’s critical, let’s discuss the specifics of correctly installing your TxTag.
Things Needed for the Installing Your TxTag
To do the installing, You first need materials to do the installation, In this way, you won’t have any difficulties looking for materials to do the task.
TxTag gum placement is made easy and trouble-free by this.
Required Items:
- TxTag sticker: The adhesive tag you will receive during sign up.
- Windshield of a Vehicle: Most reasonable surfaces with the TxTag must have a smooth, plain surface.
- Glass cleaner and a soft cloth: These items will be used to wipe the area of the windshield.
Then you are set to begin fixing your TxTag after collecting all of this.
How Do I Place My TxTag? A Step-by-Step Guide
All that’s needed for the question how do I place my TxTag is clearly laid out instruction on how to do leverage these step by step guides and succeed. You got To learn to do it in a section wise fashion.
Step 1: Choose the Right Spot on Your Windshield
- For the cars: users are recommended to stick the TxTag a little lower than the rear view mirror which would be around 2 inches. The stick must be placed at the inside the windshield of the vehicle.
- For longs and SUVs: Make sure to position the pole in the parallel center of the windshield which is visible to the toll scanners.
Step 2: Make the Windshield Clean:
- Use a clean and soft cloth and a glass cleaner to wipe the area of the windshield where you will fix the cuadrant of the txtag.
- Make sure the area is not wet and has no dust particles or grease for better hold of the xfermos Paste.
Step 3: Get the TxTag Ready:
- Carefully pull the protective layer off the TxTag sticker.
- Carefully steer clear of contact with the adhesive area in order to preserve its stickiness.
Step 4: Attaching the Tag to the Vehicle Windshield
- Fix the tx tag to the windshield glass towards the area that has been cleaned with a soft cloth and alcohol.
- Using your fingers, press on the tag gently to make sure that no air gets trapped below and inside.
Step 5: Ensure that you can see the a Tag while in Driver’s Seat.
- Ensure the position of tag still allows the driver to see through the vehicle without any impedances.
- If required, shift TxTag position from the windshield but consider the possibility of peeling off a sticker and re applying it might lessen its strength.
By following the aforementioned steps, we guarantee that you can use the TxTag on toll ways and barriers without any issues.
Troubleshooting: Common Issues with TxTag Placement
However, in certain rare situations even after following through these instructions there are still some challenges to be faced. Let’s take a look at some of these recurrent issues and how to fix them so that you never need to ask how do I put my TxTag on again.
| Problem | Cause | Solution |
|---|---|---|
| TxTag not detected | Incorrect placement or dirty windshield | Re-clean the area and reposition the TxTag. |
| TxTag falls off | Adhesive compromised | Contact TxTag customer service for a replacement. |
| Obstructed signal | Tag placed behind tinted glass or metal | Relocate the TxTag to an untinted area. |
With these strategies in use, your Tag should work perfectly regardless of the situation.
Frequently Asked Questions
If you are still worried by how to place my TxTag, you should find these FAQs reassuring and informative.
Can I Place My TxTag on Tinted Glass?
Absolutely Not, TxTag are not meant to be applied on window surfaces that have a metallic coating or are heavily tinted as it would distort the signal.
How do I place my TxTag if I have multiple vehicles?
Every vehicle is required to have a TxTag, and all that is needed is retaining the earlier instructions regarding placement of the device.
Can I Remove and Reapply My TxTag?
Unfortunately No, because the Tag is designed for a single application. You will need to get in touch with TxTag to get a replacement in case you want to reposition it.
These FAQs make sure all the eventualities involving your TxTag will never catch you unprepared.
Top Tips for Perfect TxTag Installation
To get the maximum effect from your TxTag, it’s advised you bear the following in mind while installing the Tag:
- Follow the Manual: Refer to the TxTag instructions provided with the sticker.
- Avoid Extreme Weather: Install the TxTag in a cool, dry environment for best adhesion.
- Seek Professional Help: If you’re unsure, visit a TxTag customer service center for assistance.
Following these tips, you will never have the need to ask yourself how do I place my TxTag again.
Conclusion
How do I place my TxTag? Now you know! Proper placement of your TxTag is essential in order to avoid any troubles on the toll road. Selecting an area on your window to place the tag and making sure that it is properly affixed are some of the procedures that must be followed so that it can work correctly. And if this happens, remember the customer service of TxTag is at your disposal. Place your TxTag today and say goodbye to the toll payment.
